Explanation of 2-part brake disc
- The PCCB brake discs consist of two parts on the front and rear axles. The brake disc -1-
is screwed to the brake-disc chamber -2-
with 10 screws (M6) -3-.
- The complete brake disc only is available as a spare part (disc + brake-disc chamber)!
- Do not separate the brake-disc chamber -2-
and brake disc -1-
from each other. Refer to Fig 1. It is also not permissible and not necessary to turn the screws -3-.
The screws are safeguarded against turning by compression in the bushing.
Courtesy of PORSCHE OF NORTH AMERICA, INC.
- It is essential that the tightening torque of the 10 screws is not changed (do not turn the screws) as this will have a negative effect on the sound behaviour.
- Brake disc
- Brake-disc chamber
- Screw (10 ea.)