Fault code 23: Diagnosis/troubleshooting
DIAGNOSIS/TROUBLESHOOTING (FAULT CODE 23)
| Work instruction | Display OK | If not OK | ||
|---|---|---|---|---|
| 1 | Check wire from the alarm system control module to the DME control module for short circuit to B+. |
|
0 V Step 2 |
Repair wiring harness -> End |
| 2 | Check wire from the alarm system control module to the DME control module for open circuit |
|
< 5 Step 3 |
Repair wiring harness -> End |
| 3 |
|
-> End | ||