LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Turbo, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Exterior Lights, Lamps, Switches - 911 Turbo (996) >> Troubleshooting on the Xenon headlight

Troubleshooting on the Xenon headlight

WARNING: Danger of injury from high voltage!
  • The light should always be switched off when the components (control module, gas discharge lamp, drive motor) are removed and installed!
  • The gas discharge lamp (D2S lamp) should only be operated when installed in the reflector and in the installed headlight!
  • A removed headlight does not have a high voltage!
NOTE:
  • For a faulty dipped beam or high beam headlight, the individual components (gas discharge lamp, control module) can be replaced from the second headlight!
  • Only the battery voltage can be checked with the headlight removed on the plug connection, to Pin 5 = 56a, Pin 11 = 56b and Pin 12 = 31, according to the wiring diagram in the wing!
  • The gas discharge lamp should only be operated when installed in the reflector and in the installed headlight!
scientia non olet · About LEMON Manuals