LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Turbo, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Exterior Lights, Lamps, Switches - 911 Turbo (996) >> Removing and installing control module for headlight beam adjustment >> Installing control module for headlight beam adjustment

Installing control module for headlight beam adjustment

NOTE:
  • Once installed, the control module must be coded and calibrated with the Porsche System Tester 2!
  • After this, the main headlights must be readjusted with a commercially available 5 mm ball-head screwdriver (free blade length 150 mm)!
  1. Lock the electrical plug connection and fasten the control module to the bracket.
  2. Install the right air guide and footwell bulkhead.

Adjust the main headlights: Refer to ADJUSTING THE MAIN HEADLIGHTS .

scientia non olet · About LEMON Manuals