LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Turbo, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Exterior Lights, Lamps, Switches - 911 Turbo (996) >> Removing and installing control module for gas discharge lamp >> Installing control module for gas discharge lamp

Installing control module for gas discharge lamp

  1. Engage electrical plug connection.
  2. Clip in wiring arrangement and check for correct seating.
  3. Fasten holder with control module.
  4. Close cap and secure with fastening screws.
  5. Install main headlight and perform a function test.
scientia non olet · About LEMON Manuals