8015 CDR23: Diagnosis/troubleshooting
DIAGNOSIS/TROUBLESHOOTING (8015 CDR23)
| Work instruction |
Display OK |
If not OK |
| 1 |
Visual inspection |
- Check CD for damage and the position of the data page
- Replace the CD
|
-> End |
Step 2 |
| 2 |
Read out CDR23 fault memory |
- Connect the Porsche System Tester II 9588 to the diagnostic socket; switch on the ignition and the Porsche System Tester II 9588
- Select vehicle type 911 (996) and start the automatic control unit search
- In the Control units menu, select CDR23
- Click the "> >" key in the Fault memory menu
- Read out fault memory
- Erase fault memory
- Remove ignition key and switch on ignition again.
- Read out fault memory
|
-> End |
Fault code is displayed
Step 2 |
| 3 |
Replace CDR23 |
-> End |