Diagnosis/troubleshooting on the PCM2
DIAGNOSIS/TROUBLESHOOTING (8002 PCM2 - MMI)
| Work instruction |
Display OK |
If not OK |
| 1 |
Read out PCM2 fault memory |
- Connect the Porsche System Tester II 9588 to the diagnostic socket, start it and switch on the ignition
- Select 911 Turbo (996) in the Vehicle type menu and confirm with the ">>" key
- Select PCM in the control modules selection and confirm with the ">>" key
- Select PCM2 MMI in the PCM2 function selection and confirm with the ">>" key
- Start Fault memory in the menu using the ">>" key
- Read out fault memory
- Erase fault memory
- Remove ignition key and switch on ignition again
- Read out fault memory
- Extract ambient data, press the ">>" key
|
The fault is remedied
-> End |
Step 2 |
| 2 |
Replace PCM2 |
The fault is remedied
-> End |
- |