LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 GT2 >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Wheels, Tires, Suspension Alignment - 911 Turbo (996) >> Adjusting Values For Suspension Alignment - Turbo And Gt2 >> Vehicle height

Vehicle height

NOTE:
  • The following values relate to the empty weight, i.e., full fuel tank, vehicle with spare wheel/collapsible wheel (not GT2) and tools, but without driver and without additional weight!
  • Turbo and GT2 (M002 and M003) are delivered with just one running gear tuning!
VEHICLE HEIGHT SPECIFICATIONS

Vehicle height Turbo USA Turbo RoW GT2
Front-axle height with 18-inch wheels [mm] 158 +/- 10 138 +/- 10 118 + 5 (118 to 123)
From road contact surface to lower edge of hexagon-head bolt (a/f 18) of the tension-strut screw connection to the body.
Rear-axle height with 18-inch wheels [mm] 163 +/- 10 153 +/- 10 133 + 5 (133 to 138)
From wheel contact surface to the locating bore in the rear-axle side section (between toe and camber eccentrics).
scientia non olet · About LEMON Manuals