LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 GT2 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Exterior Lights, Lamps, Switches - 911 CARRERA (996)) >> Removing and installing module for automatic headlight beam adjustment >> Installation

Removing and installing module for automatic headlight beam adjustment: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Engage the electrical plug connection and fasten the control module to the bracket.
  2. Install the right-hand air guide and footwell bulkhead.
  3. After installation, the control module must be encoded and calibrated with the Porsche System Tester 2. After this, the headlights must be readjusted using a standard 5 mm ball-head screwdriver.
NOTE: For details of headlight adjustment, refer to ADJUSTING THE MAIN HEADLIGHTS, USA VERSION .
scientia non olet · About LEMON Manuals