LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 GT2 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Exterior Lights, Lamps, Switches - 911 CARRERA (996)) >> Removing and installing main light switch >> Installation

Removing and installing main light switch: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Engage light switch by turning it slightly in counter-clockwise direction. Tightening torque of the hexagon nut M16 x 1: 3.5 Nm (2.5 ftlb.)
  2. Engage electrical plug connections and install side vent.
  3. Connect the battery and perform a function test.
scientia non olet · About LEMON Manuals