LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 GT2 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Exterior Lights, Lamps, Switches - 911 CARRERA (996)) >> Removing and installing control module for gas discharge lamp >> Installation

Removing and installing control module for gas discharge lamp: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Attach a new control module to the cover and engage the electrical plug connection.
  2. Lock the cover with control module and insert the headlight housing in the wing.
  3. Engage the electrical plug connection of the automatic headlight beam adjustment and lock the headlight housing in the wing.
  4. Carry out function check of the headlights.
scientia non olet · About LEMON Manuals