LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 GT2 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Exterior Lights, Lamps, Switches - 911 CARRERA (996)) >> Removing and installing bulb for tail light >> Removal

Removing and installing bulb for tail light: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Open engine compartment lid. Unscrew M6 x 15 fastening screw and pull out the tail light to the rear.
    Fig 1: Removing Tail Light Bulb
    G03063638Courtesy of PORSCHE OF NORTH AMERICA, INC.
  2. Turn bulb socket counter-clockwise and remove from the tail light.
  3. Take defective bulb out of the bulb socket (bayonet lock).