LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 GT2 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Exterior Lights, Lamps, Switches - 911 CARRERA (996)) >> Removing and installing bulb for number plate light >> Removal

Removing and installing bulb for number plate light: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Loosen both fastening screws and remove the number plate light.
    Fig 1: Loosening Screws & Removing Number Plate Light
    G03063640Courtesy of PORSCHE OF NORTH AMERICA, INC.
  2. Push back the rubber cover and remove defective bulb from between the contact springs.