LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 GT2 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Exterior Lights, Lamps, Switches - 911 CARRERA (996)) >> Removing and installing bulb for number plate light >> Installation

Removing and installing bulb for number plate light: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Insert new bulb in the holes of the contact springs.
  2. Push the rubber cover (protects against water leaking in) carefully over the number plate light and fasten.
  3. Perform a function test.
scientia non olet · About LEMON Manuals