LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 GT2 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Exterior Lights, Lamps, Switches - 911 CARRERA (996)) >> Removing and installing bulb for auxiliary headlight (high beam headlight) as from model year '02 >> Removing bulb for auxiliary headlight

Removing bulb for auxiliary headlight

WARNING: This page is about a different variant/trim than selected.
NOTE: The bulb for auxiliary headlights (high beam headlight/headlight flasher) is located beneath the lamp for dipped beam/high beam headlight.
  1. Switch off light. Remove main headlight. See REMOVING MAIN HEADLIGHT  .
  2. Unscrew fastening screws -A-  , press both releases -B-  and remove the rear cap -1-  .
    Fig 1: Unscrewing Fastening Screws, Pressing Releases & Removing Rear Cap
    G03063618Courtesy of PORSCHE OF NORTH AMERICA, INC.
  3. Turn the bulb holder -arrow-  . Turn counter-clockwise on the left headlight and clockwise on the right headlight. Take the bulb holder out of the headlight housing.
    Fig 2: Removing Bulb Holder Out Of Headlight Housing
    G03063619Courtesy of PORSCHE OF NORTH AMERICA, INC.
  4. Pull both releases of the plug -arrows-  apart. See Fig 2 . Pull plug out of the bulb holder.
scientia non olet · About LEMON Manuals