LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 GT2 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Exterior Lights, Lamps, Switches - 911 CARRERA (996)) >> Removing and installing bulb for additional brake light >> Installation

Removing and installing bulb for additional brake light: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Insert new bulb in the bulb holder. Engage fastening tabs and connect electrical plug connection.
  2. Insert additional brake light and turn lock approx. 90° clockwise.
  3. Push corner segment into the lock and clip it in.
  4. Perform a function test.
scientia non olet · About LEMON Manuals