General instructions / safety instructions
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
The following points must be observed during vehicle diagnosis:
- After the battery is connected, volatile memories must be reprogrammed. In the case of radio coding and tuning, the customer must be informed of decoding and the deleted tuner memory.
- The coding, calibration and headlight adjustment must be observed after an HBA control module or an angle sensor for HBA has been replaced or the running gear has been modified.
- After troubleshooting or repairs, erase the fault memory with the Porsche System Tester 2 and carry out a test drive.
- After the test drive, read out the fault memory with Porsche System Tester 2 again.
CAUTION:
Danger of damage due to improper handling of the battery and the control module connectors.
- > Never disconnect battery with engine running.
- > Never start engine without securely connected battery.
- > Never pull off or push on plug connections of the control modules or other electronic components when the ignition is switched on.