Removing And Installing Rear Spring Strut: Removal
- Lift the vehicle.
- Remove the rear wheel.
- Mark the installed position of the spring strut mount (position of the three collar nuts, -arrows-
). See Fig 1
.
Courtesy of PORSCHE OF NORTH AMERICA, INC.
- Loosen fastening nuts M10 from the spring strut mount in the vehicle interior.
- Loosen stabilizer mount at stabilizer (counter with open-ended wrench).
- Loosen screw connection between spring strut/wheel carrier -arrow-
. See Fig 2
.
Courtesy of PORSCHE OF NORTH AMERICA, INC.
- Pull out (remove) spring strut.