LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 GT2 >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Rear Wheel Suspension, Axle Shaft - 911 Turbo (996) >> Tightening Torques For Rear Axle >> Wheel carrier

Wheel carrier

WHEEL CARRIER TIGHTENING TORQUES SPECIFICATION

Location Thread Tightening torque Nm (ft.lb)
Wheel bearing to wheel carrier (lid) M8 37 (29)
Speed sensor to wheel carrier M6 10 (7.5)
Brake cover plate to wheel carrier M6 10 (7.5)
Brake disc to wheel hub M6 10 (7.5)
Brake caliper to wheel carrier (1) M12 x 1.5 85 (63)(1)
Holder for combination wire to wheel carrier M6 10 (7.5)
Wheel to wheel hub (2) M14 x 1.5 130 (96)(2)
(1) Replace screws at front and rear axle whenever they have been removed.

(2) Thinly grease thread, shank and under head (between screw head bearing surface and spherical cap ring) of the wheel bolts with Optimoly TA (aluminum paste). Do not grease bearing surface of the spherical cap facing the wheel. If heavily contaminated, clean bolts first with a lint-free cloth.
scientia non olet · About LEMON Manuals