LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 GT2 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers - 911 Turbo (996) >> Disassembling and assembling front spoiler - GT2 >> Installing front spoiler

Installing front spoiler

Fig 1: Installing Front Spoiler - GT2 (1 Of 2)
G03094469Courtesy of PORSCHE OF NORTH AMERICA, INC.
FRONT SPOILER INSTALLATION PROCEDURE AND INSTRUCTIONS - GT2 (1 OF 2)

No. Procedure Instructions
1 Install grille frame -10-  Position the grille frame -10-1-8-1- 
2 Install frame centre -9-  Position the grille frame -9-1-8-1- 
3 Install air outlet frame -6-  Check and, if necessary, replace sheetmetal nuts -7-6-1-6-5- 
4 Install covering frame -4-  Lock covering frame -4-1- 
5 Install covering cap -2-  Pull the securing cord -3-2-1- 
Fig 2: Installing Front Spoiler - GT2 (2 Of 2)
G03094470Courtesy of PORSCHE OF NORTH AMERICA, INC.
FRONT SPOILER INSTALLATION PROCEDURE AND INSTRUCTIONS - GT2 (1 OF 2)

No. Procedure Instructions
1 Fit front spoiler -1-  Insert the front spoiler -1- 
2 Tighten front spoiler -1-  Place the sheetmetal nut -5-4-3-2-1-