Work preparation

The following information is required to teach the hand-held transmitter:

Key learning code from IPAS
24-digit Code No. (see barcode label on key grip)
If the key is stolen or the hand-held transmitter is faulty, all keys still in the customer's possession will be required.

NOTE:

During maintenance work, please bear in mind that the transmission frequency of the hand-held transmitter is different according to the country of use. The corresponding reception frequency is printed on the alarm system control module. This reception frequency is either:
433 MHz with M-number M534
315 MHz with M-Nummer M535; refer to CONTRY CODING ALLOCATION .