LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 GT2 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Instruments, Fuel Gauge, Alarm System Diagnosis, K20 - 911 Turbo (996) >> Control module function >> Coding

Control module function: Coding

The following coding options are available under the menu item "Coding":

CODING FUNCTION

Menu item Function
  • Country coding
 Selection for following country codings: USA, RoW, UK, Canada, Saudi Arabia and Japan
  • Connect PST 2, switch on ignition and start the automatic control module search.
  • Select vehicle type 911 (996) and control module instrument cluster
  • Select menu item Coding
  • Select menu item Country coding 
  • Select the respective country and code with "F8" key.
  • Cruise control
 This menu item enables the instrument cluster to be coded after replacing the instrument cluster or after retrofitting a cruise-control actuator.
  • Connect PST 2, switch on ignition and start the automatic control module search.
  • Select vehicle type 911 (996) and control module instrument cluster
  • Select menu item Coding
  • Select menu item Cruise-control actuator 
  • Select the respective menu item with / without cruise-control actuator and code with "F8" key
  • Vehicle Ident. No.
 It is possible to enter the Vehicle Ident. No. under this menu item after replacing the instrument cluster.
  • Connect PST 2, switch on ignition and start the automatic control module search.
  • Select vehicle type 911 (996) and control module instrument cluster
  • Select menu item Coding
  • Select menu item Vehicle Ident. No. 
  • Enter Vehicle Ident. No and code with "F8" key
  • Activate instrument cluster
 This menu item enables the instrument cluster to be activated or deactivated. The deactivated instrument cluster is converted into the low-current mode (production mode) and can be automatically activated under the menu item
Vehicle hand-over. 
  • Connect PST 2, switch on ignition and start the automatic control module search.
  • Select vehicle type 911 (996) and control module instrument cluster
  • Select menu item Coding
  • Select menu item Activate instrument cluster 
  • Select the desired coding and code with "F8" key.
  • Time
 Time entry option
  • Connect PST 2, switch on ignition and start the automatic control module search.
  • Select vehicle type 911 (996) and control module instrument cluster
  • Select menu item Coding
  • Select menu item Time 
  • Enter the time and code with "F8" key
scientia non olet · About LEMON Manuals