LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 GT2 >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Exterior Lights, Lamps, Switches - 911 Turbo (996) >> Removing and installing control module for headlight beam adjustment >> Removing control module for headlight beam adjustment

Removing control module for headlight beam adjustment

  1. Remove footwell bulkhead and right air guide.
  2. Undo control module from below (2 sheetmetal screws).
  3. Unlock the electrical plug connection and take out control module.
    Fig 1: Removing Control Module For Headlight Beam Adjustment
    G03091718Courtesy of PORSCHE OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals