LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 GT2 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instruments, Fuel Gauge, Alarm System - 911 Turbo (996) >> Removing and installing horn >> Installing horn

Installing horn

  1. Observe installation position of the horns!
    • The horn must not touch the body or a bracket.
    • A toothed washer must be fitted between the horn and bracket.

      Tightening torque of the M6 hexagon nut: 10 N.m (7.5 ftlb.) 

scientia non olet · About LEMON Manuals