Telephone/telematics control module function: Identification
The diagnosis software number and the part numbers for the PCM2 can be read out under this menu item.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition
- Select 911 Turbo (996) in the Vehicle type menu and confirm with the "->|" key
- Select PCM in the control modules selection and confirm with the ">>" key
- Select PCM2 GW in the PCM2 function selection and confirm with the ">>" key
- Select the Identification menu item and press the ">>" key
- Diagnosis software number; PCM2 parts number appears on the display
NOTE:
Deactivate the automatic traffic announcement before performing the diagnosis on the PCM2. If this is not done, the diagnosis will abort.