Telephone/telematics control module function: Coding
It is possible to extract the chassis number and to code the PCM2 on a country-specific basis in the Modify coding menu.
CODING ITEM FUNCTION CHART - TELEPHONE/TELEMATICS
| Menu item |
Function |
|
|
Under this menu item, the PCM2 code can be coded after replacing the PCM2.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition
- Select 911 Turbo (996) in the Vehicle type menu and confirm with the "->|" key
- Select PCM in the control modules selection and confirm with the ">>" key
- Select PCM2 GW in the PCM2 function selection and confirm with the ">>" key
- Select menu item Coding
- Select menu item PCM2 code
- Take the PCM2 code from IPAS, enter it and code it with the "F8" key
|
|
|
Using this menu item, you can code the country code
- Connect and start the Porsche System Tester II 9588 and switch on the ignition
- Select 911 Turbo (996) in the Vehicle type menu and confirm with the "->|" key
- Select PCM in the control modules selection and confirm with the ">>" key
- Select PCM2 GW in the 911 Turbo (996) PCM2 function selection and confirm with the ">>" key
- Select the coding menu item and confirm with the ">>" key
- Select the menu item Country coding
and confirm with the ">>" key
- Select the relevant country coding
from the menu item that is displayed and code it with the "F8" key
|