Production mode

If the MOST control module is set to Production mode on, it is in low-current mode. The display remains black, the control module cannot function.

1. Connect and start the Porsche System Tester II 9588 and switch on the ignition.
2. Select 911 Turbo (996) in the Vehicle type menu and confirm with the ">>" key.
3. Select PCM2 in the control modules selection and confirm with the ">>" key.
4. Select PCM2 GW in the PCM2 function selection and confirm with the ">>" key.
5. Select Coding in the PCM2 GW function selection and confirm with the ">>" key.
6. Select Production mode in the PCM2 GW Coding function selection and confirm with the ">>" key.
7. Select Production mode off menu and code with the "F8" key.

The following options can be coded:

• Production mode off.
• Production mode on.