Coding country-specific tuner settings

Connect and start the Porsche System Tester II 9588 and switch on the ignition.
Select 911 Turbo (996) in the Vehicle type menu and confirm with the ">>" key.
Select PCM2 in the control modules selection and confirm with the ">>" key
Select PCM2 GW in the control modules selection and confirm with the ">>" key.
Select the Coding menu item and press the ">>" key.
Select the menu item Tuner parameters and press the ">>" key.
Take the country-specific code as it appears in the table, enter it in the form and code with the "F8" key.