Ring break diagnosis (with engine running)

RING BREAK DIAGNOSISITEM FUNCTION CHART

Menu item	Function
Ring break diagnosis (with engine running).	Using this menu item, a ring break diagnosis can be carried out (with the engine running). Connect and start the Porsche System Tester II 9588 and switch on the ignition. Select 911 Turbo (996) in the Vehicle type menu and confirm with the ">>" key. Select PCM2 in the Control modules menu and confirm with the ">>" key. Select MOST components check in the PCM2 function selection and confirm with the ">>" key. Select Ring break diagnosis (when the engine is running) in the 911 Turbo (996) PCM2-GW MOST components check function selection and confirm with the ">>" key.

Menu item

Function

Using this menu item, a ring break diagnosis can be carried out (with the engine running).

Connect and start the Porsche System Tester II 9588 and switch on the ignition.
Select 911 Turbo (996) in the Vehicle type menu and confirm with the ">>" key.
Select PCM2 in the Control modules menu and confirm with the ">>" key.
Select MOST components check in the PCM2 function selection and confirm with the ">>" key.
Select Ring break diagnosis (when the engine is running) in the 911 Turbo (996) PCM2-GW MOST components check function selection and confirm with the ">>" key.