Control unit function - gateway: Identification

The diagnosis software number and the part numbers for the PCM2 can be read out under this menu item.

1. Connect and start the Porsche System Tester II 9588 and switch on the ignition.
2. Select 911 Turbo (996) in the Vehicle type menu and confirm with the ">>" key.
3. Select PCM2 in the control modules selection and confirm with the ">>" key.
4. Select PCM2 GW in the PCM2 function selection and confirm with the ">>" key.
5. Select the menu item Identification  and confirm with the ">>" key.
6. Diagnosis software number; PCM2 part number  appear on the display.
   NOTE: Deactivate the automatic traffic announcement before performing the diagnosis on the PCM2. If this is not done, the diagnosis will abort (applies only to version numbers < 03).