MOST system check (with engine running)
MOST SYSTEM CHECK ITEM FUNCTION CHART
| Menu item |
Function |
- MOST system check (with engine running).
|
Using this menu item, a MOST system check can be carried out with the ignition on. The following checks are carried out automatically and their results are displayed.
- Gateway start-up condition is read out.
- MOST installed components list (required and actual installed components list) is analysed.
- Ring line diagnosis.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 Turbo (996) in the Vehicle type menu and confirm with the ">>" key.
- Select PCM2 in the Control modules menu and confirm with the ">>" key.
- Select MOST components check in the PCM2 function selection and confirm with the ">>" key.
- Select MOST system check
in the 911 Turbo (996) PCM2 MOST components check function selection and confirm with the ">>" key.
- Follow the Tester instructions.
Whenever there are several ring breaks, the 1st ring break is displayed in the following order:
- PCM2 Gateway > external amplifier.
- External amplifier > CD changer.
- CD changer > telephone.
- Telephone > PCM2 MMI.
is displayed. Then the check is terminated.
- Start the optical performance check.
|