Control unit function - MMI: Identification

The diagnosis software number and the part numbers for the PCM2 can be read out under this menu item.

1. Connect and start the Porsche System Tester II 9588 and switch on the ignition.
2. Select 911 Turbo (996) in the Vehicle type menu and confirm with the ">>" key.
3. Select PCM2 in the control modules selection and confirm with the ">>" key.
4. Select PCM2 MMI in the 911 Turbo (996) PCM2 function selection menu and confirm with the ">>" key.
5. Select Identification in the PCM2 MMI function selection and confirm with the ">>" key.
6. Diagnosis software number; PCM2 part number  appear on the display.
7. Call up Extended identification  by pressing the "F8" key