Control module function - external Harman amplifier: Coding
Using this menu item, you can code the Harman amplifier as required for the vehicle.
CODING ITEM FUNCTION CHART - EXTERNAL HARMAN AMPLIFIER
| Menu item |
Function |
- Vehicle type vehicle coding
|
Under this menu item, the external Harman amplifier corresponding to the vehicle type can be coded.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 Turbo (996) in the Vehicle type menu and confirm with the ">>" key.
- Select PCM in the Control module menu and confirm with the ">>" key.
- Select External Harman amplifier in the 911 Turbo (996) function selection menu and confirm with the ">>" key.
- Select Vehicle coding in the menu and confirm with the ">>" key.
- Select Vehicle type vehicle coding in the Coding menu and confirm with the ">>" key.
- Select 911 Turbo (996) in the menu and code with the "F8" key.
|
- Vehicle version vehicle coding
|
Under this menu item, the external Harman amplifier corresponding to the vehicle version can be coded.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 Turbo (996) in the Vehicle type menu and confirm with the ">>" key.
- Select PCM in the Control module menu and confirm with the ">>" key.
- Select External Harman amplifier in the 911 Turbo (996) function selection menu and confirm with the ">>" key.
- Select Vehicle version in the menu and confirm with the ">>" key.
- Select Vehicle type vehicle coding in the Coding menu and confirm with the ">>" key.
- Select 911 Turbo (996) in the menu and code with the "F8" key.
|
- Right/left-hand drive vehicle coding
|
Under this menu item, the external Harman amplifier corresponding to the vehicle configuration can be coded.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 Turbo (996) in the Vehicle type menu and confirm with the ">>" key.
- Select PCM in the Control module menu and confirm with the ">>" key.
- Select External Harman amplifier in the 911 Turbo (996) function selection menu and confirm with the ">>" key.
- Select Vehicle coding in the menu and confirm with the ">>" key.
- Select Right/left-hand drive vehicle coding in the Coding menu and confirm with the ">>" key.
- Select Right or left-hand drive in the menu corresponding to the vehicle equipment and code with the "F8" key.
|