Input signals

The following queries can be run using this menu item:

Key code
Status of the optical performance check
Tuner parameters
GAL (noise-dependent loudspeaker boost)

NOTE: Deactivate the automatic traffic announcement before performing the diagnosis on the CDR23. If this is not done, the system will crash.

INPUT SIGNALS ITEM FUNCTION - CDR23

Menu item	Function
Key code	Under this menu item, the function of the CDR23 operating buttons can be checked. Connect and start the Porsche System Tester II 9588 and switch on the ignition. Select 911 Turbo (996) in the Vehicle type menu and confirm with the "->\|" key Select PCM in the Control units selection menu and confirm with the ">>" key Select CDR23 in the 911 Turbo (996) CDR23 function selection menu and confirm with the ">>" key. Select Input signals in the CDR23 function selection menu and confirm with the ">>" key. Select Key code in the 911 Turbo (996) CDR23 input signals menu and confirm with the ">>" key By operating the buttons of the CDR23, the correct function of each key code is displayed.
Status of the optical performance check	Using this menu item, the result of the optical performance check can be read out. Connect and start the Porsche System Tester II 9588 and switch on the ignition. Select 911 Turbo (996) in the Vehicle type menu and confirm with the "->\|" key Select PCM in the Control units selection menu and confirm with the ">>" key Select CDR23 in the 911 Turbo (996) CDR23 function selection menu and confirm with the ">>" key. Select Input signals in the 911 Turbo (996) CDR23 function selection menu and confirm with the ">>" key. Select Status of optical performance check in the CDR23 input signals menu, mark with the ">" key and confirm with the ">>" key. The result can be read out.
Tuner parameters	Using this menu item, each country coding of the tuner can be read out. Connect and start the Porsche System Tester II 9588 and switch on the ignition. Select 911 Turbo (996) in the Vehicle type menu and confirm with the "->\|" key Select PCM in the Control units selection menu and confirm with the ">>" key Select CDR23 in the 911 Turbo (996) CDR23 function selection menu and confirm with the ">>" key. Select Input signals in the 911 Turbo (996) CDR23 function selection menu and confirm with the ">>" key. Select Tuner parameters in the 911 Turbo (996) CDR23 input signals menu using the ">" key and confirm with the ">>" key. The currently coded country code is displayed in the CDR23 Tuner parameters menu.
GAL (noise-dependent loudspeaker boost)	Using this menu item, the coded GAL value can be read out. Connect and start the Porsche System Tester II 9588 and switch on the ignition. Select 911 Turbo (996) in the Vehicle type menu and confirm with the "->\|"> key Select PCM in the Control units selection menu and confirm with the ">>" key Select CDR23 in the 911 Turbo (996) CDR23 function selection menu and confirm with the ">>" key. Select Input signals in the 911 Turbo (996) CDR23 function selection menu and confirm with the ">>" key. Select and mark GAL (noise-dependent loudspeaker boost ) in the 911 Turbo (996) CDR23 input signals menu with the ">" key and confirm with the ">>" key. The current coded value is displayed in the 911 Turbo (996) CDR23 noise-dependent loudspeaker menu.