Drive links

Drive links of the CDR23 can be activated with this menu item. This allows the function of the drive links to be assessed very quickly using the Porsche System Tester II 9588.

The following drive links can be activated:

All On display test
Display check

SINGLE CD ITEM FUNCTION CHART - CDR23

Menu item	Function
All On display test	Under this menu item, the function of the CDR23 display segments can be checked. Connect and start the Porsche System Tester II 9588 and switch on the ignition. Select 911 Turbo (996) in the Vehicle type menu and confirm with the "->\|" key Select PCM in the Control units selection menu and confirm with the ">>" key Select CDR23 in the 911 Turbo (996) CDR23 function selection menu and confirm with the ">>" key. Select Drive links in the 911 Turbo (996) CDR23 function selection menu and confirm with the ">>" key. Select All On display test in the CDR23 drive links menu using the ">" key and confirm with the ">>" key. Press the "F8" key to start the test. All segments of the CDR23 display are activated and can be checked for operation.

Menu item

Function

All On display test

Under this menu item, the function of the CDR23 display segments can be checked.

Connect and start the Porsche System Tester II 9588 and switch on the ignition.
Select 911 Turbo (996) in the Vehicle type menu and confirm with the "->|" key
Select PCM in the Control units selection menu and confirm with the ">>" key
Select CDR23 in the 911 Turbo (996) CDR23 function selection menu and confirm with the ">>" key.
Select Drive links in the 911 Turbo (996) CDR23 function selection menu and confirm with the ">>" key.
Select All On display test in the CDR23 drive links menu using the ">" key and confirm with the ">>" key.
Press the "F8" key to start the test.
All segments of the CDR23 display are activated and can be checked for operation.