8004 CD changer: Diagnosis/troubleshooting
DIAGNOSIS/TROUBLESHOOTING (8004 CD CHANGER)
| Work instruction |
Display OK |
If not OK |
| 1 |
Read out the PCM2/CDR23 fault memory |
- Connect the Porsche System Tester II 9588 to the diagnostic socket; switch on the ignition and the Porsche System Tester II 9588
- Select vehicle type 911 (996) and start the automatic control unit search
- In the Control units menu, select PCM2/CDR23
- Click the ">>" key in the Fault memory menu
- Read out fault memory
- Erase fault memory
- Remove ignition key and switch on ignition again.
- Read out fault memory
|
-> End |
Fault code is displayed
Step 2 |
| 2 |
Replace PCM2/CDR23 |
-> End |