LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Wheels, Tires, Suspension Alignment - 911 CARRERA (996) >> Adjusting values for suspension alignment - 911 Carrera >> Vehicle height

Vehicle height

NOTE:
  • The following values relate to the empty weight, i.e. full fuel tank, vehicle with spare wheel/collapsible wheel and tools, but without driver and without additional weights!
  • X74 = 30 mm lower. This can be identified by 1 yellow mark on the shock absorber!
VEHICLE HEIGHT SPECIFICATION - 911 CARRERA

Vehicle height Carrera 2/4
USA: Standard and Sport
Carrera 2/4
RoW: Standard
Carrera 2/4
RoW: Sport
Carrera 2/4
30 mm lower
(X74)
Front-axle height
with 17-inch wheels [mm]
157 +/- 10 147 +/- 10 137 +/- 10 117 +/- 10
with 18-inch wheels [mm] 158 +/- 10 148 +/- 10 138 +/- 10 118 +/- 10
From road contact surface to lower edge of hexagon-head bolt (a/f 18) of the tension-strut screw connection to the body.
Rear-axle height
with 17-inch wheels [mm]
157 +/- 10 157 +/- 10 147 +/- 10 127 +/- 10
with 18-inch wheels [mm] 163 +/- 10 163 +/- 10 153 +/- 10 133 +/- 10
From wheel contact surface to the locating bore in the rear-axle side section (between toe and camber eccentrics).