Safety notes and information for repairs on the chassis: Steering
CAUTION:
Danger of damage to property if too much Pentosin CHF 11 S is filled in the supply tank of the power steering or if Pentosin comes into contact with the coolant hoses when filling or topping up.
- Observe the following specifications in order to avoid overfilling and thus overflowing.
- Multiple steering operations (manoeuvring) with the engine switched off change the fluid level in the reservoir! Fluid level rises. In this case, the engine must be run for approx. 20 seconds immediately prior to the fluid level check.
- If coolant hoses come into contact with Pentosin, thoroughly clean them with water IMMEDIATELY.
- Replace visibly swollen coolant hoses.
NOTE:
Rack-and-pinion steering gear and servo pump must not be repaired or dismantled.