LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Wheel Suspension, Axle Shaft - 911 CARRERA (996) >> Removing and installing wheel bearing housing (wheel carrier) >> Replacing wheel bearing housings (wheel carriers) >> 2. Required tie rods (toe control arms)

2. Required tie rods (toe control arms)

The use of wheel carriers with a long steering arm is only permissible in conjunction with tie rods version B - SP No. 996.331.045.10. It is only permissible to install these tie rods in pairs.

Fig 1: Identifying Cast Number In Different Versions Of Tie Rod
G03105707Courtesy of PORSCHE OF NORTH AMERICA, INC.