Fitting running gear parts

WARNING: Danger of accident and material damage. If the mounting specifications are not observed, the long-life behavior of screw connections cannot be guaranteed (connections can become loose) and/or restriction of the service life or function of components is possible.

Carry out an exact visual inspection of all parts used on the chassis!
Use only original spare parts approved by Porsche.
Replace self-locking nuts.
When fitting control arms on the wheel carrier, ensure that the bevel pinions are clean. If necessary, clean with lint-free cloth. Do not use a cleaning agent.
Specified tightening torques should be strictly observed.
Observe grease specification (for example on drive shafts).