LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Ventilation - 911 CARRERA (996) >> Removing and installing drive motor for fresh-air/recirculation valve >> Installation

Removing and installing drive motor for fresh-air/recirculation valve: Installation

  1. The removal or installation position of the drive motor and fresh-air/recirculation valve cannot be changed.
  2. Tighten fastening screw carefully (plastic housing).
  3. Engage electrical plug connection and route wire carefully.
  4. Perform a function test after installation.
scientia non olet · About LEMON Manuals