Modify coding
This menu item is used to retrieve and change the coding of the following functions:
CODING MODIFICATION - AS OF MY 2002
| Coding | Setting | Function |
|---|---|---|
| Japan coding Recirculating function |
Active/ not active | In the coding for Japan, air recirculation is switched on constantly even when external temperatures are < 3°C (also no automatic resetting after ignition off 20 minutes) |
| Pollen filter | Present/not present | |
| AC symbol | Active / not active | The AC symbol can be hidden in the display. |
| PCM | Installed /not installed | Vehicles without PCM or with PCM2 must be coded as not installed! |
Procedure:
- Select the menu item Modify coding using the Porsche System Tester II 9588. (The table listed above appears.)
- The display can be saved using the "F4" key.
- Using the buttons up and down select the coding to be modified and continue using the "FORWORD" button.
- Using the buttons up and down select the correct coding and confirm using the Coding (F8) button.
- The upper right display changes to the new coding.
- For coding overview, return using the button "BACKWORD".
- Select another coding (see Step 3 ) or end the procedure using the button "BACKWORD".