LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Convertible Top, Hardtop - 911 CARRERA (996)) >> Removing and installing motor for rear side section flap >> Installing motor

Installing motor

WARNING: This page is about a different variant/trim than selected.
  1. Installing motor

    Insert motor into the spindle guide with the spindle and fasten with Torx screws.

    Install wires for micro switches into the plug connect and clip in wires.

  2. Install rear side section flap and perform a function test

    See REMOVING AND INSTALLING REAR SIDE SECTION FLAP .

scientia non olet · About LEMON Manuals