LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Convertible Top, Hardtop - 911 CARRERA (996)) >> Removing and installing convertible-top control unit >> Calibrating the convertible top

Calibrating the convertible top

WARNING: This page is about a different variant/trim than selected.
NOTE: The convertible top opens and closes automatically during convertible-top calibration with the Porsche System Tester. Calibration can be started irrespective of whether the convertible top is open or closed. The latching hook in roof frame 1 does not close during calibration. There must not be any objects in or on the convertible top to obstruct this.
  1. Connect and switch on the Porsche System Tester.
  2. Switch ignition on
  3. Select menu item "Convertible top". Select menu item "Calibrate" in the command line which then appears.
  4. Start calibration with the "F7" key.
scientia non olet · About LEMON Manuals