Removing motor for convertible-top compartment lid drive
WARNING: This page is about a different variant/trim than selected.
- Moving convertible top to service position
- Removing cover over the motor
To loosen the carpet, pull out the plastic clips with the special tool 21 and take out the carpet.-4- . See Fig 1.
- Electric plug connection for microswitch
Disengage electric plug connection for microswitch -5- on support, unlock -A- and disconnect.
- Removing motor from support.
Loosen both fastening nuts -1- unlock the electric plug connection -2- and unplug at control unit. See Fig 1.
Pull the motor backwards out of the bracket.
- Removing motor from convertible top compartment lid drive
Loosen both heaxagon thread bolts -3- and pull out. See Fig 1.
Take out motor for convertible top compartment lid drive -4- . See Fig 1.