Calibration values, pot. 2, convertible-top compartment lid
WARNING: This page is about a different variant/trim than selected.
CALIBRATION VALUES (POT. 2, CONVERTIBLE-TOP COMPARTMENT LID)
| Designation | Dimension | Note |
|---|---|---|
| Pot. 2 calibration value 1 | >1.0 volt | Tester display must be greater than 1.0 volt |
| Pot. 2 calibration value 2 | < 3.9 volts | Tester display must be less than 3.9 volts |
| Pot. 2 calibration value 3 | < 3.9 volts | Tester display must be less than 3.9 volts |
| Pot. 2 calibration value 4 | < 3.9 volts | Tester display must be less than 3.9 volts |