LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Convertible Top, Hardtop - 911 CARRERA (996)) >> Removing and installing convertible-top compartment lid - Carrera Cabriolet >> Tightening torques

Tightening torques

WARNING: This page is about a different variant/trim than selected.
CONVERTIBLE-TOP COMPARTMENT LID FASTENER TORQUE SPECIFICATION (CARRERA CABRIOLET)

Location Illustration Thread Tightening torque [Nm] (ftlb.)
Fastening nut -5-  . See Figure. M6 9.7 (7.5)
Fastening screw -10-  . See Figure. M6 9.7 (7.5)