Tightening Torques
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Location | Thread | Tightening torque [Nm] (ft.lb) |
|---|---|---|
| Hydraulic mount to carrier side section | M8 | 23 (17) |
| Transmission support to transmission | M10 | 65 (48) |
| Drive shaft on the transmission flange | M8 | 39 (29) |
| Rear-axle cross member to carrier side section | M10 | 65 (48) |
| Cable to rear-axle to rear-axle cross member | M8 | 23 (17) |
| Rear cross member to body | M10 | 65 (48) |
| Stabilizer to carrier side section | M8 | 23 (17) |
| Stabilizer to stabilizer mount | M10 | 46 (34) |
| Sheetmetal brace (nuts and screws) | M10 | 65 (48) |
| Holder for vent line to engine transport eyebolt | M6 | 10 (7.5) |
| Transformer to driver plate | M8 | 39 (29) |