LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Automatic Transmission, Controls, Case) >> Removing And Installing Selector Knob >> Installation

Removing And Installing Selector Knob: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the selector knob with spring clip, compression spring and locking button.
    NOTE:
    • Fit conical compression spring with the small diameter facing the guide peg.
  2. Press the complete selector knob onto the shift lever until it bottoms and check function of the locking button.
scientia non olet · About LEMON Manuals