LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Automatic Transmission, Controls, Case) >> Removing And Installing SHIFTLOCK Solenoid >> Installation

Removing And Installing SHIFTLOCK Solenoid: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit solenoid in correct position and properly route cable underneath the cable guides (see Figure at left).
  2. Plug cable onto manual switch according to wiring diagram and fasten plug connection with holder on the selector support.